| Model | RG-AP630(CD) |
| Target Deployments | For big campus, wireless city, harbor, storage room, mine |
| Basic Specifications |
| Radio | Concurrent dual-radio dual-band |
| Protocol | 802.11a/b/g/n/ac |
| Operating Bands | 802.11b/g/n: 2.4GHz to 2.483GHz
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (vary depending on countries) |
| Antenna | Built-in directional antenna |
| Antenna Gain | 10dBi |
| Max Throughput | 300Mbps@2.4G
867Mbps@5G
1.167Gbps per AP |
| Spatial Streams | 2 |
| IP Rating | IP67 |
| Ports |
| Service Port | 1 10/100/1000Mbps ETH1/PoE IN port (RJ-45 connector);
1 SFP port (combo with ETH1) |
| Power |
| Power Supply | PoE (802.3af)
Compatible with POE+ |
| Power Consumption | <12.95W |
| WLAN |
| Maximum clients per AP | Up to 512 |
| SSID capacity | Up to 14 per radio
Up to 28 per AP |
| SSID hiding | Support |
| X-speed | Support |
| STA control | SSID/radio-based |
| Bandwidth control | STA/SSID/AP-based speed control |
| Preference for 5GHz (band select) | Support |
| Wireless position tracking | Support |
| Dynamic Frequency Selection(DFS) | Future Release Support |
| Security |
| PSK, Web, and 802.1x authentication | Support |
| Data encryption | WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
| QR code authentication | Support |
| SMS authentication | Support |
| PEAP authentication | Support |
Support
Data frame filtering | Whitelist, static/dynamic blacklist |
| User isolation | Support |
| Rogue AP detection and countermeasure | Support |
| Dynamic ACL assignment | Support |
| WAPI | Support |
| RADIUS | Support |
| CPU Protection Policy (CPP) | Support |
| Routing |
| IPv4 address | Static IP address or DHCP reservation |
| IPv6 CAPWAP tunnel | Support |
| ICMPv6 | Support |
| IPv6 address | Manual or automatic configuration |
| Multicast | Multicast to unicast conversion |
| Management and Maintenance |
| Network management | SNMP v1/v2C/v3, Telnet, SSH, TFTP, and FTP and web management |
| Visualized wireless heat map analysis | Support (need to integrate with SNC) |
| Real-time spectrum analysis | Support (need to integrate with SNC) |
| Fault detection and alarm | Support |
| Cloud AC management | Support |
| Statistics and logs | Support |
| FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
| External Characteristics |
| Lock | Support |
| LED Indicators | Power status and WDS signal strength |
| Dimensions (W x D x H) | 276 × 246 × 90 mm |
| Weight | <2.5kg |
